Suzuki RM250 - Brake Pad Replacement

15-2 FRONT AND REAR BRAKES
BRAKE PAD REPLACEMENT
FRONT BRAKE PADS
• Remove the plug 1.
• Remove the pad mounting pin 2 behind the plug.
• Remove the front brake pads.
NOTE:
Replace two pads as a set.
• Fit new brake pads into the caliper and tighten the pad mount-
ing pin to the specified torque.
 Brake pad mounting pin: 18 N·m (1.8 kgf-m, 13.0 lb-ft)
NOTE:
Pump the brake lever several times to seat the brake pads after
reassembling.
REAR BRAKE PADS
• Remove the pad mounting pin 1.
• Remove the rear brake pads.
NOTE:
Replace two pads as a set.