Suzuki RM250 - Clutch Cover and Release Camshaft Service

CLUTCH 7-9
CLUTCH COVER
• Replace the O-ring with a new one.
• Apply grease to the O-ring.
 99000-25010: SUZUKI SUPER GREASE “A”
(or equivalent grease)
• Install the clutch cover 1.
 Clutch cover bolt: 11 N·m (1.1 kgf-m, 8.0 lb-ft)
CLUTCH RELEASE CAMSHAFT
• Install the clutch release camshaft 1.
• Install the stator and magneto rotor. (13-11)
• Install a new gasket and magneto cover. (13-12)
• Reinstall the brake pedal. (5-9)
INSPECTION AFTER INSTALLATION
• Pour transmission oil. (2-9)
• Adjust the clutch cable play. (2-13)
• Adjust the brake pedal height. (2-20)