Suzuki RM250 - Page 251

18-6 SERVICING INFORMATION
SUSPENSION
ITEM STD/SPEC. LIMIT
Front fork stroke 310 mm
(12.2 in)
—
Inner tube outside diam. 47 mm
(1.85 in)
—
Front fork spring free length 494 mm
(19.45 in)
487 mm
(19.17 in)
Front fork spring rate 4.4 N/mm
(0.44 kgf/mm)
—
Front fork oil type SUZUKI FORK OIL SS-05 or equivalent fork oil —
Front fork oil capacity (each leg) OUTER: 350 ml
(11.83/12.32 US/Imp oz)
—
INNER: 193 ml (6.52/6.80 US/Imp oz)
Front fork damping force adjuster Compression 8 clicks turn back —
Rebound 11 clicks turn back —
Front fork air pressure 0 kPa (0 kgf/cm
2
, 0 psi) —
Rear shock absorber gas pressure 981 kPa
(9.8 kgf/cm
2
, 139.5 psi)
—
Rear shock absorber oil type SUZUKI REAR SUSPENSION OIL SS-25
or equivalent rear suspension oil
—
Rear shock absorber oil capacity 380 ml (12.84/13.38 US/Imp oz) —
Rear shock absorber spring set
length
4.1 mm (0.161 in) compressed from the free length —
Rear shock absorber spring rate 53 N/mm
(5.3 kgf/mm)
—
Rear shock absorber damping
force adjuster
Rebound 11 clicks turn back —
Compression
(High speed)
2 turns back —
Compression
(Low speed)
9 clicks turn back —
Rear wheel travel 310 mm
(12.2 in)
—
Swingarm pivot shaft runout
—
0.3 mm
(0.01 in)