EasyManua.ls Logo

Svantek SVAN 977A - 14.5 Firmware upgrade; 14.6 Preservation of internal batteries; 14.7 Transportation and storage; 14.8 Cleaning

Svantek SVAN 977A
302 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
116
SVAN 977A User Manual
14.5 FIRMWARE UPGRADE
SVANTEK is committed to continuous innovation path of development, and as such reserves the right to provide
firmware enhancements based on user’s feedback.
To update the instrument firmware:
Unpack the provided firmware package (provided as a suitable compressed file).
Make sure the unit is turned off.
Connect SC 16 cable to the computer and SV 977A instrument (USB interface).
Keeping pressed the <ENTER> and keys switch on the instrument - the following message should
appear on the unit's screen: BOOTSTRAP v1.06 (or higher).
Wait for the message <USB> on the unit’s screen and start from the PC: go-usb.bat.
The changing number and final message: "..... o.k." should appear on the computer screen.
Successful firmware update will be indicated by the message: Program loaded!
Switch off the instrument.
Note: With the use of the SvanPC++ software it is very easy to check if there are any new firmware
releases available for download.
14.6 PRESERVATION OF INTERNAL BATTERIES
To preserve the life of the internal batteries, it is recommended that the instrument is turned off when it is
stored. In case of alkaline batteries, it is recommended to extract them out of the instrument.
When the instrument is turned off, it still draws a small amount of battery power. Therefore,
it is recommended to charge the cell every few months if it is not going to be used regularly.
14.7 TRANSPORTATION AND STORAGE
For transportation or storage purpose, we recommend using the packaging provided by the manufacturer. In a
potentially dirty industrial environment it is advisable to use the carrying case provided by the manufacturer such
as the fabric material case (SA 47), lightweight case (SA 143) or waterproof case (SA 79), which ensures
excellent mechanical and environmental protection and long-term storage conditions.
14.8 CLEANING
Clean the surface of the instrument with damp soft cloth.
The instrument sockets should be cleaned with the use of compressed air.
Note: In cases of larger dirt, such as oil or grease, contact your Local Authorized Distributor or Svantek
Service Office.

Table of Contents

Related product manuals