Svantek SVAN 977A - 6.1.4 Logger view

65
SVAN 977A User Manual
2
3
7
8
1
6
4
5
Changing the active fields
You can change the active field with the ▲ / ▼
(vertically) or ◄ / ► (horizontally) key.
▼
6.1.4 Logger view
The Logger view depends on the settings
made in the Logging list (path: <Menu> /
Measurement / Logging). If Logger (path:
<Menu> / Measurement / Logging /
Logger Setup) is disabled, the Logger view
mode is not active!
=>
So, to have this view active, enable the
Logger!
=>
When Logger is enabled, and some results
have been selected for logging the logger plot
can be viewed.
=>
Logger view fields
1. Y-scale
2. Logger plot
3. Name of the logged result and profile
number
4. Name of the file
5. Real Time Clock
6. Cursor position
7. Result value for the cursor position
8. Cursor time position