Peak-to-peak, the difference between highest and lowest
value of the signal within the elapsed measurement time.
Root Mean Square result of the time-weighted vibration
(acceleration, velocity or displacement) level within the
elapsed measurement time.
15.4 MEASUREMENT PARAMETERS
Section of the Main Menu that enables selecting the
measurement parameters in the screens: General
Settings, Measurement Trigger, Profiles, Logging,
Spectrum, FFT, RT60 Settings, Compensation Filter,
Range, RPM Measurement, Exposure Time, Statistical
Levels, Timer and Alarms.
General measurement settings: Start Delay, Start Sync.,
Integration Period Inf., Integration Period, Repetition
Cycles, RMS Integration, Day Time Limits and
Rolling Time.
Delay between pressing the <Start> key and the start of
measurement integration.
Synchronization of the measurement/integration start to
the nearest full minute or hour of the instrument real-time
clock. It helps to measure in full cycles.
Infinitive averaging of Summary Results that lasts from
start of the measurement till its cancellation with the
<Stop> key or remotely.
Time of averaging of Summary Results: from 1 second
to Infinitive. For example, with 8 hours integration period
the LEQ result will be averaged for 8 hours. In case of
Infinitive, the measurement will last until the user presses
the <Stop> key.
To Next Page
Loading...
