Saving setup files ( )
The measurement configuration
setup files can be stored in the SD Card
memory with an extension .SVT manually
either by means of <S/P> key or by creating
the <New File> in the Setup Manager list.
There is no automatic option for the setup files
saving, but the instrument always generates
new setup name automatically with default
prefix SET.
3.6 FILES DOWNLOADING AND UPLOADING
Downloading files
All files stored in the memory (micro SD-card) can be downloaded to the PC. There are two ways to download
files.
Since the file structure of the SD-card is the same as on most PC, you may extract the micro SD-card and use it
directly in the PC. But it is not recommended.
It is recommended to use the SvanPC++ software, which provides download and upload functions as well as
data view and data processing options. In this case, the instrument should be connected to the PC via the SC 56
USB cable.
Note: Description of SvanPC++ is given in the “SvanPC++ User Manual”.
Uploading files
Same approach is used for uploading files (usually setup files).
Files can be upload via micro SD-card or via SvanPC++ software.
3.7 ACTIVATION OF OPTIONAL FUNCTIONS
Standard instrument firmware contains all basic functions to perform measurements in accordance with most
international standards and methods. For more complex tasks you have the possibility of expanding the basic
functions of the instrument with additional functions. These features include 1/1 and 1/3 octave analyser, signal
recording and others.
If additional functions were not supplied in the instrument kit and were not unblocked by the supplier, such a task
is in responsibility of the user who decides to buy additional functions later.
The optional function should be activated in
the moment of the first attempt to use it. For
example, if time signal recording (Wave or
Event) was blocked, but you purchased this
option later, then during the first attempt to
switch it on, the instrument requires entering
the special code that will unlock this function.
Once unlocked option will be available
permanently.
To Next Page
Loading...
