Svantek SVAN 977A - Instrument Parameters

140
SVAN 977A User Manual
Velocity
Velocity spectrum which is displayed if it has been
selected in the Spectrum Type screen.
Chapter
10.3.4,
11.3.4
Displacement
Displacement spectrum which is displayed if it has been
selected in the Spectrum Type screen.
Chapter
10.3.4,
11.3.4
Screen Setup
Screen that enables setting screen brightness and power
saving.
Chapter
6.4
Brightness
Brightness of the instrument display. Is setting up in the
Screen Setup screen.
Chapter
6.4
Dim screen on idl
e
Screen dimming in no activity after certain delay. Is
setting up in the Screen Setup screen.
Chapter
6.4
Screen off on idle
Screen switching off in no activity after certain delay. Is
setting up in the Screen Setup screen.
Chapter
6.4
15.6 INSTRUMENT PARAMETERS
Name
Description
Screen
Reference
Instrument
Section in the Main Menu that enables setting the
hardware components of the instrument in the screens:
Auto Start, Battery, Communication Ports, External
Power, IEPE Current, Keyboard Settings, Multifunction
I/O, RTC, Wireless Transfer, Unit Name and Unit Label.
Chapter
8
Auto Start
Instrument function that enables the measurement start
right after the instrument is turning on without pressing
the <Start> key.
Chapter
8.1
Battery
Screen allowing to check the instrument power source
status.
Chapter
8.2