FCC and IC
This product contains an FCC and Industry Canada certified Bluetooth
®
Low energy wireless transmission
module:
• FCC ID: QOQWT12
• Industry Canada ID: 5123A-BGTWT12A
• Producer: Silicon Laboratories
• Model: WT12 Bluetooth Module
FCC Statements:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Operation is subject to the following two conditions:
• This device may not cause interference and
• This device must accept any interference, including interference that may cause undesired operation
of the device.
Weight with the battery 600 g (without accelerometer).
Dimensions 39
x
79
x
305 mm (with microphone and preamplifier).
Environmental parameters
• Working temperature range -10C +50C
• Storing temperature range -20C +50C (-30C +60C without batteries)
• Humidity 90% RH in 40C (uncondensed vapour)
Compliance with EU Directives
CE mark indicates compliance with RED Directive 2014/53/EU (see DECLARATION OF CONFORMITY):
• Art 3.1a: Safety
• Art 3.1b: Electromagnetic Compatibility
• Art 3.2: Radio.