6. TROUBLESHOOTING
them if they are not. End the communication through the Bluetooth® wire-
less technology, and reboot the unit.
THE INTERCEPTOR™ UNIT ENTERS UNATTENDED SURVEILLANCE MODE
WHEN USING BLUETOOTH® OBEX FILE TRANSFER SERVICE.
The I™ automatically enters Unattended Surveillance Mode
whenever it is NOT operating in the ID Mode. Change to this mode before
starting OBEX File Transfer Service functions.
THE PC SOFTWARE CANNOT SWITCH ON-LINE DATA ACQUISITION FROM
ONE INTERCEPTOR™ UNIT TO ANOTHER.
Stop the on-line data acquisition for device 1. Press “switch to history graph”,
and then select the second device. Restart the online data acquisition.
THE GPS COORDINATES IN AN EVENT REPORT ARE IDENTIFIED AS
INVALID.
During the identification process, the device lost contact with the satellite
which resulted in the last coordinates received being displayed in the event
report. Because there was a loss of satellite signal prior to completion of the
identification record, the coordinates are identified as invalid because they
may not indicate the true position of the device.
114 Interceptor™/en/5.1(4956)/Feb2010 ICx Technologies
To Next Page
Loading...
