8
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
ERROR CODE and TROUBLESHOOTING
8 - 11
E722 RADF jam Jam not reaching the original exit/reverse
sensor (during scanning): The original
which passed the read sensor does not
reach the original exit/reverse sensor when
it is transported from the scanning section
to exit section.
P. 8-79
E724 Stop jam at the original registration sensor:
The trailing edge of the original does not
pass the original registration sensor after its
leading edge has reached this sensor.
P. 8-80
E725 Stop jam at the read sensor: The trailing
edge of the original does not pass the read
sensor after its leading edge has reached
this sensor.
P. 8-79
E726 Transport/exit signal reception jam: RADF
receives the transport/exit reception signal
from the equipment when no original is at
the exposure waiting position.
P. 8-80
E727 Jam not reaching the original reading end
sensor
P. 8-80
E729 Stop jam at the original reading end sensor P. 8-81
E731 Stop jam at the original exit/reverse sensor:
The trailing edge of the original does not
pass the original exit/reverse sensor after
its leading edge has reached this sensor.
P. 8-81
E744 Stop jam at the original exit/reverse sensor P. 8-82
E745 Jam not reaching the original exit reverse
sensor
P. 8-82
E746 Exit/reverse sensor paper remaining jam P. 8-83
E762 Registration sensor paper remaining jam P. 8-83
E770 Original width detection sensor-1 paper
remaining jam
P. 8-83
E771 Original width detection sensor-2 paper
remaining jam
P. 8-83
E772 Original width detection sensor-3 paper
remaining jam
P. 8-83
E773 Intermediate transport sensor paper
remaining jam
P. 8-83
E774 Reading start sensor paper remaining jam P. 8-79
E775 Reading end sensor paper remaining jam P. 8-83
E777 Exit sensor paper remaining jam P. 8-83
E860 Original jam access cover open jam P. 8-84
E870 RADF open jam P. 8-85
E871 Cover open jam in the read ready status P. 8-85
E890 ADF time out jam P. 8-85
Error code Classification Contents Troubleshooting
To Next Page
Loading...
