8
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
ERROR CODE and TROUBLESHOOTING
8 - 15
EF25 Finisher jam
(Saddle section)
Hole Punch Unit paper trailing edge
detection abnormality: The paper trailing
edge cannot be detected within a fixed time
after its skew is found.
P. 8-11 0
EF27 Hole Punch Unit paper edge detection
order abnormality-1: The paper leading
edge is detected before its skew is
detected.
P. 8-111
EF28 Hole Punch Unit paper edge detection
order abnormality-2: The paper trailing
edge is detected before its skew is
detected.
P. 8-111
Error code Classification Contents Troubleshooting
To Next Page
Loading...
