e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE and TROUBLESHOOTING
8 - 46
[E130] 1st drawer misfeeding (paper not reaching the 1st drawer feed sensor)
Bypass pick-up solenoid • Solenoid check
(Perform the output check: 03-1254)
• Connector check
• Harness check
ADU board • Connector check (CN490, CN496, CN498)
• Board check
PFC board • Connector check (CN509)
• Harness check
• Board check
Drive unit, Rollers • Gear check
• Roller check
Replace parts Remarks
Bypass feed sensor
Bypass motor
Bypass pick-up solenoid
ADU board
PFC board
ADU roller
Rollers
Classification Error item
Paper misfeeding The paper fed from the 1st drawer does not reach the 1st
drawer feed sensor.
Check item Measures
1st drawer feed sensor • Sensor check
(Perform the input check: 03-[SCAN]ON/[1]/[H])
• Connector check
• Harness check
Feed motor • Motor check
(Perform the output check: 03-120)
• Connector check
• Harness check
PFC board • Connector check (CN512, CN513)
• Board check
Drive unit, Rollers • Gear check
• Roller check
Replace parts Remarks
1st drawer feed sensor
Feed motor
PFC roller
Rollers
Check item Measures
To Next Page
Loading...
