8
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
ERROR CODE and TROUBLESHOOTING
8 - 47
[E140] 2nd drawer misfeeding (paper not reaching the 2nd drawer feed sensor)
[E150] 3rd drawer misfeeding (paper not reaching the 3rd drawer feed sensor)
Classification Error item
Paper misfeeding The paper fed from the 2nd drawer does not reach the 2nd
drawer feed sensor.
Check item Measures
2nd drawer feed sensor • Sensor check
(Perform the input check: 03-[SCAN]ON/[1]/[G])
• Connector check
• Harness check
Feed motor • Motor check
(Perform the output check: 03-121)
• Connector check
• Harness check
PFC board • Connector check (CN512, CN513)
• Board check
Drive unit, Rollers • Gear check
• Roller check
Replace parts Remarks
2nd drawer feed sensor
Feed motor
PFC roller
Rollers
Classification Error item
Paper misfeeding The paper fed from the 3rd drawer does not reach the 3rd
drawer feed sensor.
Check item Measures
3rd drawer feed sensor • Sensor check
(Perform the input check: 03-[SCAN]ON/[1]/[F])
• Connector check
• Harness check
Feed/transfer motor • Motor check
(Perform the output check: 03-122)
• Connector check
• Harness check
3rd drawer feed clutch • Clutch check
(Perform the output check: 03-250)
• Connector check
• Harness check
PFC board • Connector check (CN502, CN505)
• Board check
Drive unit, Rollers • Gear check
• Roller check
To Next Page
Loading...
