Toshiba e-studio 6560c - Page 804

e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE and TROUBLESHOOTING
8 - 48
[E160] 4th drawer misfeeding (paper not reaching the 34th drawer feed sensor)
[E180] Option LCF misfeeding (Paper not reaching the LCF feed sensor)
Replace parts Remarks
3rd drawer feed sensor
Feed/transfer motor
PFC roller
Rollers
3rd drawer feed clutch
Classification Error item
Paper misfeeding The paper fed from the 4th drawer does not reach the 4th
drawer feed sensor.
Check item Measures
4th drawer feed sensor • Sensor check
(Perform the input check: 03-[SCAN]ON/[1]/[E])
• Connector check
• Harness check
Feed/transfer motor • Motor check
(Perform the output check: 03-122)
• Connector check
• Harness check
4th drawer feed clutch • Clutch check
(Perform the output check: 03-251)
• Connector check
• Harness check
PFC board • Connector check (CN502, CN506)
• Board check
Drive unit, Rollers • Gear check
• Roller check
Replace parts Remarks
4th drawer feed sensor
Feed/transfer motor
PFC roller
Rollers
4th drawer feed clutch
Classification Error item
Paper misfeeding Paper fed from the LCF does not reach the LCF feed sensor.
Check item Measures
Option LCF feed sensor • Sensor check
(Perform the input check: 03-[SCAN]ON/[5]/[E])
• Connector check
• Harness check