8
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
ERROR CODE and TROUBLESHOOTING
8 - 53
[E220] 2nd drawer transport jam (not reaching the 1st drawer transport sensor)
[E310] 3rd drawer transport jam (not reaching the 1st drawer transport sensor)
[E340] 4th drawer transport jam (not reaching the 1st drawer transport sensor)
[E3D0] LCF transport jam (not reaching the 1st drawer transport sensor)
[E230] 1st drawer misfeeding (Paper not reaching the 1st drawer transport sensor)
Classification Error item
Paper transport jam The paper does not reach the 1st drawer transport sensor
after it has passed the 2nd drawer feed sensor.(E220)
The paper does not reach the 1st drawer transport sensor
after it has passed the 2nd drawer feed sensor.(E310)
The paper does not reach the 1st drawer transport sensor
after it has passed the 2nd drawer feed sensor.(E340)
Paper fed from the LCF and passed through the 2nd drawer
feed sensor does not reach the 1st drawer transport
sensor.(E3D0)
Check item Measures
1st drawer transport sensor • Sensor check
(Perform the input check: 03-[SCAN]ON/[1]/[D])
• Connector check
• Harness check
Transport motor-2 • Motor check
(Perform the output check: 03-125/525)
• Connector check
• Harness check
Transport motor-1 • Motor check
(Perform the output check: 03-124/524)
• Connector check
• Harness check
PFC board • Connector check (CN512, CN513)
• Board check
Drive unit, Rollers • Gear check
• Roller check
Replace parts Remarks
1st drawer transport sensor
Transport motor-2
Transport motor-1
PFC board
Rollers
Classification Error item
Paper transport jam Paper fed from the 1st drawer does not reach the 1st drawer
transport sensor.
Check item Measures
1st drawer transport sensor • Sensor check
(Perform the input check: 03-[SCAN]ON/[1]/[D])
• Connector check
• Harness check
To Next Page
Loading...
