e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE and TROUBLESHOOTING
8 - 54
[E240] 2nd drawer transport jam (Paper not reaching the 2nd drawer transport sensor)
Transport motor-1 • Motor check
(Perform the output check: 03-124/524)
• Connector check
• Harness check
Feed motor • Motor check
(Perform the output check: 03-120/520)
• Connector check
• Harness check
PFC board • Connector check (CN512, CN513)
• Board check
Drive unit, Rollers • Gear check
• Roller check
Replace parts Remarks
1st drawer transport sensor
Transport motor-1
Feed motor
PFC board
Rollers
Classification Error item
Paper transport jam Paper fed from the 2nd drawer does not reach the 2nd drawer
transport sensor.
Check item Measures
2nd drawer transport sensor • Sensor check
(Perform the input check: 03-[SCAN]ON/[1]/[C])
• Connector check
• Harness check
Transport motor-2 • Motor check
(Perform the output check: 03-125/525)
• Connector check
• Harness check
Feed motor • Motor check
(Perform the output check: 03-121/521)
• Connector check
• Harness check
PFC board • Connector check (CN512, CN513)
• Board check
Drive unit, Rollers • Gear check
• Roller check
Replace parts Remarks
2nd drawer transport sensor
Transport motor-2
Feed motor
PFC board
Rollers
Check item Measures
To Next Page
Loading...
