8
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
ERROR CODE and TROUBLESHOOTING
8 - 55
[E260] Option LCF transport jam (Paper not reaching the registration sensor)
[E290] Option LCF transport jam
Classification Error item
Paper transport jam Paper fed from the option LCF does not reach the registration
sensor.
Check item Measures
Registration sensor • Sensor check
(Perform the input check: 03-[ALL]OFF/[2]/[C], 03-
[COPY]ON/[5]/[H])
• Connector check
• Harness check
Transport motor-1 • Motor check
(Perform the output check: 03-124/524)
• Connector check
• Harness check
PFC board • Connector check (CN500, CN512, CN520)
• Board check
LGC board • Connector check (CN309)
• Board check
Drive unit, Rollers • Gear check
• Roller check
Replace parts Remarks
Registration sensor
Transport motor-1
PFC board
LGC board
Rollers
Classification Error item
Paper transport jam Paper fed from the Option LCF does not reach the 1st drawer
transport sensor.
Check item Measures
1st drawer transport sensor • Sensor check
(Perform the input check: 03-[SCAN]ON/[1]/[D])
• Connector check
• Harness check
Transport motor-1 • Motor check
(Perform the output check: 03-124/524)
• Connector check
• Harness check
LCF transport motor • Motor check
(Perform the output check: 03-127)
• Connector check
• Harness check
To Next Page
Loading...
