e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE and TROUBLESHOOTING
8 - 56
[E320] 3rd drawer transport jam (not reaching the 2nd drawer transport sensor)
[E350] 4th drawer transport jam (not reaching the 2nd drawer transport sensor)
[E3E0] LCF transport jam (not reaching the 2nd drawer transport sensor)
LCF transport clutch • Clutch check
(Perform the output check: 03-269)
• Connector check
• Harness check
PFC board • Connector check (CN512, CN513)
• Board check
Drive unit, Rollers • Gear check
• Roller check
Replace parts Remarks
1st drawer transport sensor
Transport motor-1
LCF transport motor
LCF transport clutch
PFC board
Rollers
Classification Error item
Paper transport jam The paper does not reach the 2nd drawer transport sensor
after it has passed the 3rd drawer feed sensor.(E320)
The paper does not reach the 2nd drawer transport sensor
after it has passed the 4th drawer feed sensor.(E350)
Paper fed from the LCF and passed through the LCF feed
sensor does not reach the 2nd drawer transport
sensor.(E3E0)
Check item Measures
2nd drawer transport sensor • Sensor check
(Perform the input check: 03-[SCAN]ON/[1]/[C])
• Connector check
• Harness check
Feed motor • Motor check
(Perform the output check: 03-122/172)
• Connector check
• Harness check
PFC board • Connector check (CN502, CN513)
• Board check
Drive unit, Rollers • Gear check
• Roller check
3rd drawer transport clutch • Clutch check
(Perform the output check: 03-252)
• Connector check
• Harness check
Replace parts Remarks
3rd drawer transport clutch
Check item Measures
To Next Page
Loading...
