8
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
ERROR CODE and TROUBLESHOOTING
8 - 59
[E3F0] Tandem LCF transport jam (Paper not reaching the tandem LCF transport sensor)
Drive unit, Rollers • Gear check
• Roller check
Replace parts Remarks
4th drawer transport sensor
4th drawer transport clutch
4th drawer feed clutch
Feed/transport motor
PFC board
Rollers
Classification Error item
Paper transport jam Paper fed from the Tandem LCF does not reach the tandem
LCF transport sensor.
Check item Measures
Tandem LCF transport sensor • Sensor check
(Perform the input check: 03-[SCAN]ON/[1]/[B])
• Connector check
• Harness check
Tandem LCF transport clutch • Clutch check
(Perform the output check: 03-252)
• Connector check
• Harness check
Tandem LCF feed clutch • Clutch check
(Perform the output check: 03-250)
• Connector check
• Harness check
Feed/transport motor • Motor check
(Perform the output check: 03-122)
• Connector check
• Harness check
PFC board • Connector check (CN505, CN516)
• Board check
Drive unit, Rollers • Gear check
• Roller check
Replace parts Remarks
Tandem LCF transport sensor
Tandem LCF transport clutch
Tandem LCF feed clutch
Feed/transport motor
PFC board
Rollers
Check item Measures
To Next Page
Loading...
