e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE and TROUBLESHOOTING
8 - 58
[E380] 4th drawer transport jam (Paper not reaching the 4th drawer transport sensor)
Check item Measures
3rd drawer transport sensor • Sensor check
(Perform the input check: 03-[SCAN]ON/[1]/[B])
• Connector check
• Harness check
3rd drawer transport clutch • Clutch check
(Perform the output check: 03-252)
• Connector check
• Harness check
3rd drawer feed clutch • Clutch check
(Perform the output check: 03-250)
• Connector check
• Harness check
PFC board • Connector check (CN502, CN505)
• Board check
Drive unit, Rollers • Gear check
• Roller check
Replace parts Remarks
3rd drawer transport sensor
3rd drawer transport clutch
3rd drawer feed clutch
PFC board
Rollers
Classification Error item
Paper transport jam Paper fed from the 4th drawer does not reach the 4th drawer
transport sensor.
Check item Measures
4th drawer transport sensor • Sensor check
(Perform the input check: 03-[SCAN]ON/[1]/[A])
• Connector check
• Harness check
4th drawer transport clutch • Clutch check
(Perform the output check: 03-253)
• Connector check
• Harness check
4th drawer feed clutch • Clutch check
(Perform the output check: 03-251)
• Connector check
• Harness check
Feed/transport motor • Motor check
(Perform the output check: 03-122)
• Connector check
• Harness check
PFC board • Connector check (CN502, CN506)
• Board check
To Next Page
Loading...
