Trane TR200 - 0-37 Display Text 1; 0-38 Display Text 2; 0-39 Display Text 3; 0-70 Date and Time

0-37 Display Text 1
Range: Function:
Applica-
tion de-
pend-
ent*
[0 - 0 ] In this parameter it is possible to write an individual text string for display
in the keypad or to be read via serial communication. If to be displayed
permanently select Display Text 1 in par. 0-20
Display Line 1.1 Small,
par. 0-21
Display Line 1.2 Small, par. 0-22 Display Line 1.3 Small,
par. 0-23
Display Line 2 Large or par. 0-24 Display Line 3 Large. Use the
[
▲
] or [
▼
] buttons on the keypad to change a character. Use the [
◀
] and
[
▶
] buttons to move the cursor. When a character is highlighted by the
cursor, it can be changed. Use the [
▲
] or [
▼
] buttons on the keypad to
change a character. A character can be inserted by placing the cursor
between two characters and pressing [
▲
] or [
▼
].
0-38 Display Text 2
Range: Function:
Applica-
tion de-
pend-
ent*
[0 - 0 ] In this parameter it is possible to write an individual text string for display
in the keypad or to be read via serial communication. If to be displayed
permanently select Display Text 2 in par. 0-20
Display Line 1.1 Small,
par. 0-21
Display Line 1.2 Small, par. 0-22 Display Line 1.3 Small,
par. 0-23
Display Line 2 Large or par. 0-24 Display Line 3 Large. Use the
[
▲
] or [
▼
] buttons on the keypad to change a character. Use the [
◀
] and
[
▶
] buttons to move the cursor. When a character is highlighted by the
cursor, this character can be changed. A character can be inserted by
placing the cursor between two characters and pressing [
▲
] or [
▼
].
0-39 Display Text 3
Range: Function:
Applica-
tion de-
pend-
ent*
[0 - 0 ] In this parameter it is possible to write an individual text string for display
in the keypad or to be read via serial communication. If to be displayed
permanently select Display Text 3 in par. 0-20
Display Line 1.1
Small,par. 0-21 Display Line 1.2 Small, par. 0-22 Display Line 1.3 Small,
par. 0-23
Display Line 2 Large or par. 0-24 Display Line 3 Large. Use the
[
▲
] or [
▼
] buttons on the keypad to change a character. Use the [
◀
] and
[
▶
] buttons to move the cursor. When a character is highlighted by the
cursor, this character can be changed. A character can be inserted by
placing the cursor between two characters and pressing [
▲
] or [
▼
].
0-70 Date and Time
Range: Function:
Applica-
tion de-
pend-
ent*
[Application dependant] Sets the date and time of the internal clock. The format to be used is set
in par. 0-71
Date Format and par. 0-72 Time Format.
How to program the Frequency Converter
BAS-SVX19C-EN 6-21