Trane TR200 - Q3-3 Closed Loop Settings

Q3-3 Closed Loop Settings
Q3-30 Single Zone Int. Set Point Q3-31 Single Zone Ext. Set Point
Par. 1-00
Configuration Mode Par. 1-00 Configuration Mode
Par. 20-12
Reference/Feedback Unit Par. 20-12 Reference/Feedback Unit
Par. 20-13
Minimum Reference/Feedb. Par. 20-13 Minimum Reference/Feedb.
Par. 20-14
Maximum Reference/Feedb. Par. 20-14 Maximum Reference/Feedb.
Par. 6-22
Terminal 54 Low Current Par. 6-10 Terminal 53 Low Voltage
Par. 6-24
Terminal 54 Low Ref./Feedb. Value Par. 6-11 Terminal 53 High Voltage
Par. 6-25
Terminal 54 High Ref./Feedb. Value Par. 6-12 Terminal 53 Low Current
Par. 6-26
Terminal 54 Filter Time Constant Par. 6-13 Terminal 53 High Current
Par. 6-27
Terminal 54 Live Zero Par. 6-14 Terminal 53 Low Ref./Feedb. Value
Par. 6-00
Live Zero Timeout Time Par. 6-15 Terminal 53 High Ref./Feedb. Value
Par. 6-01
Live Zero Timeout Function Par. 6-22 Terminal 54 Low Current
Par. 20-21
Setpoint 1 Par. 6-24 Terminal 54 Low Ref./Feedb. Value
Par. 20-81
PID Normal/ Inverse Control Par. 6-25 Terminal 54 High Ref./Feedb. Value
Par. 20-82
PID Start Speed [RPM] Par. 6-26 Terminal 54 Filter Time Constant
Par. 20-83
PID Start Speed [Hz] Par. 6-27 Terminal 54 Live Zero
Par. 20-93
PID Proportional Gain Par. 6-00 Live Zero Timeout Time
Par. 20-94
PID Integral Time Par. 6-01 Live Zero Timeout Function
Par. 20-70
Closed Loop Type Par. 20-81 PID Normal/ Inverse Control
Par. 20-71
PID Performance Par. 20-82 PID Start Speed [RPM]
Par. 20-72
PID Output Change Par. 20-83 PID Start Speed [Hz]
Par. 20-73
Minimum Feedback Level Par. 20-93 PID Proportional Gain
Par. 20-74
Maximum Feedback Level Par. 20-94 PID Integral Time
Par. 20-79
PID Autotuning Par. 20-70 Closed Loop Type
Par. 20-71
PID Performance
Par. 20-72
PID Output Change
Par. 20-73
Minimum Feedback Level
Par. 20-74
Maximum Feedback Level
Par. 20-79
PID Autotuning
How to program the Frequency Converter
6-14 BAS-SVX19C-EN