Weinmann MEDUCORE Standard2 - Page 169

WM 68401 04/2021
MEDUCORE Standard
2
EN 169
6 Operation
5. Evaluate the ECG leads and heart rate.
6. If necessary: Select another ECG lead using the Lead function
button.
7. If necessary: Make the following ECG settings in the user menu
(see “10.3.2 ECG settings”, page 259):
• Adapt amplitude scaling in order to adapt the displayed
height of the ECG curve to the ECG measuring signal.
• Set Autom. for amplitude scaling to have the displayed
height of the ECG curve adapted to the ECG measuring
signal automatically.
• Adapt the feed rate of the ECG curve.
• Activate the filter to filter interference caused by the power
supply network out of the ECG display.
8. If necessary: Set alarm limits in the user menu (see “10.3.1
Alarm settings”, page 255).
Alternatively:
Set automatic alarm limits in the application menu (see “9
Application menu”, page 248).