Weinmann MEDUCORE Standard2 - Page 48

48 EN MEDUCORE Standard
2
WM 68401 04/2021
3 Description
3.3.5 NIBP function mode
3-7 Display in monitor mode with NIBP function mode
superimposed
1
23456
7
8
9
10
11
No. Designation Description
1 History
Shows the time and values of the last three NIBP
measurements.
2 Start/Stop
• Starts or stops an NIBP measurement.
• Starts or stops an interval measurement.
• Stops venous stasis.
3 IV Starts venous stasis.
4 Duration of venous stasis
Displays the time for which the NIBP cuff is
maintaining venous stasis.
5 Interval
• Specifies whether the NIBP measurement is an
individual NIBP measurement or an interval
measurement.
• Specifies the time between two consecutive NIBP
measurements for interval measurement.
6 Interval duration
Displays the time between two consecutive NIBP
measurements for interval measurement.
7 Initial Allows initial NIBP cuff pressure to be changed.
8 Initial cuff pressure
Displays the pressure to which the device will inflate
the NIBP cuff at the next NIBP measurement.
9 Alarm limits
Displays the alarm limits for systolic and diastolic
measured values.