WM 68401 04/2021
MEDUCORE Standard
2
EN 91
4 Preparation
5. Connect the red wire of the 12 V supply cable to the positive
terminal of the 12 V on-board power supply in the vehicle.
6. Connect the black wire of the 12 V supply cable to the negative
terminal of the 12 V on-board power supply in the vehicle.
Result The charging station is connected to the 12 V on-board power
supply in the vehicle. The line power indicator of the charging
station is green.
4.5.5 Charging the battery in the charging station
1. Charge the battery in the charging station (see “4.4.3
Charging the battery in the charging station”, page 87).
Result The battery is fully charged.
To Next Page
Loading...
