Service Manual FB 7100 Programming
4 - 78 January, 2005
4.3.10 Change config. files menu
Introduction The Change config. files menu is used to choose menu language, recipe
settings and menu configurations.
This table describes the options of the Change config files menu.
v Sel Esc^
CHANGE CONFIG. FILES
* Set language file
Set recipe file
Sub menu Description
Set language file The function is used to select the required
language file for the texts used in display and
Event logbook.
Set recipe file The function is used to select the required recipe
file.
Note: When changing the recipe file, please be
aware that the existing drink counters will be
overwritten by new ones with new text labels,
giving the impression that the present figures in
the non resettable counters apply to the new text
labels, (e.g. ‘Coffee with milk’ may be replaced by
‘Chocolate’).
To avoid erroneous information about the number
sold and turnover of individual drinks it may
therefore be recommended to read out the status
of the non resettable counters before switching to
a new recipe file.
Set menu file The function is used to select the required menu
file.
To Next Page
