Service Manual FB 7100 Water System
5A - 6 January, 2005
A.2.5 Disassembling the water system (boiler and pump)
Preparation Before disassembling the water system
• Open the door .
• Switch off the main switch..
• Remove coffee waste bucket and pull forward the base tray
• Release distributor head and rest it on top of its mouting arm, see this
section, page 5A-2.
• Remove cover for water system, see this section, page 5A-2.
• Drain the boiler completely, see this section, page 5A-3.
• Remove water system, see this section, page 5A-4.
Hot water, risk of being scalded.
Disassembly Follow these steps to disassemble the water system after having removed
it from the machine:
Step Action Illustration
1 Detach the pump from its clip (1) and
hold the pump in a sligthly tilted
position while removing hose from
pump and boiler (2). This prevents
limescale from falling into the pump.
2.
Remove T-piece for overflow.
3 Unclip boiler in both sides, and remove
it.
1
2
To Next Page
Loading...
