Service Manual FB 7100 Water System
January, 2005 5A - 9
Illustration The overboil thermostat is located at the front of the boiler as illustrated
below:
Installation Installation is done in reverse order.
A.2.9 Removing the water level sensor (electrode)
Preparation Before removing the water level sensor
• Open the door.
• Switch off the main switch.
• Remove coffee waste bucket and pull forward the base tray.
• Release distributor head and rest it on top of its mounting arm, see this
section, page 5A-2.
• Remove cover for water system, see this section, page 5A-2.
Removal Follow these steps to remove the water level sensor:
Installation Installation is done in reverse order. Apply water on reinstallation.
Step Action Illustration
1 Pull off the electrical connection.
2 Pull the water level sensor out of its
holder.
To Next Page
Loading...
