Service Manual FB 7100
January, 2005 5K - 1
K Power Supply Unit and Control
K.1 Adjustments
Not available here.
K.2 (Dis-)assemblies
K.2.1 Safety instructions
Installation and repair works on the machine may only be carried out by
trained service technicians.
Be extremely careful, your life can be endangered!
The vending machine controllers and power supply box parts are carrying
the mains voltage if the machine is connected to the power supply.
Make sure that no splashes of the product or water get onto the vending
machine controllers.
Caution:
Electrostatic discharge may cause damage to Printed Circuit Boards
(PCBs) and electronic components.
To avoid damage:
• Always wear an anti-static wrist wrap when handling PCBs or
electronic components.
Alternatively touch a metal area of the earthed cabinet to discharge static
electricity from your body prior to touching any PCB or electronic compo-
nent.
To Next Page
Loading...
