Service Manual FB 7100
January, 2005 5K - 5
Ensure that connectors are correctly fitted.
K.2.5 Removing the transformer
Preparation Before removing the transformer:
• Disconnect the power supply.
• Open the door
• Remove the freshbrewer unit, see chap. 5.B.3.2, page 5B-4.
• Remove cover plate for power supply box, FB print and CPU, see
chap. 5.K.2.3, page 5K-3.
• Detach the power supply box, see this section, page 5K-4.
Ensure that the machine is disconnected from the mains electrical supply!
The machine is only isolated from the mains supply when the plug has
been pulled out.
Removal Follow these steps to remove the transformer:
Installation Installation is done in reverse order.
Step Action Illustration
1 Remove four screws.
2 Lift off transformer.
To Next Page
Loading...
