Wittenborg FB 7100 - How to Unpack the Vending Machine; Unpacking

Service Manual FB 7100
2 - 8 January, 2005
2.3 Unpacking
2.3.1 How to unpack the machine
Note Do not use any sharp utensils in order to avoid scratches on the machine.
Unpacking Follow these steps to unpack the machine:
Positioning parts
delivered with
macine
Follow these steps to locate the parts delivered with the machine:
Step Action
1.
Ensure that the machine has not been damaged during transportation.
2.
Remove pallet from machine and position the machine on proper site.
3.
Level the machine by adjusting the
feet.
It is essential that the machine is
completely level.
4.
Remove the transport protections located inside the machine.
5.
Check the list of all items delivered with the machine. see this section,
page 2-9.
6.
Position all parts delivered with machine, see Positioning below.
Step Action
1.
Place the drip tray in door.
2.
Place the quick reference card and
the operator manual in manual
holder between ingredient canister
and cabinet wall.