Service Manual FB 7100 Contents
5 - 2 January, 2005
Removing the actuator B.3.9
Disassembling the tachoboard B.3.10
Removing the actuator motor B.3.11
Disassembling the actuator and its driving parts B.312
Disassembling driving parts of actuator without removing actuator B.3.13
Replacing the microswitch BSSW B.3.14
Replacing the ejector spring B.3.15
Replacing the gaskets of the plunger B.3.16
Removing and descaling the filter plate B.3.17
General notes B.3.18
Function of the brewer B.4
Electrical diagrams B.5
Technical specifications B.6
Options B.7
Accessories B.8
Dosing system C
Adjustments C.1
(Dis)-assembiles C.2
Removing the instant ingredient mixing units C.2.1
Removing the hot water module C.2.2
Removing the cover plate for the instant module C.2.3
Disassembling a dispensing valve for instant ingredients C.2.4
Replacing a whipper motor C.2.5
Removing an ingredient motor C.2.6
Removing the spring for lid from ingredient canisters C.2.7
Removing the suspension for ingredient canisters C.2.8
Removing the guide for ingredient canister from suspension rail C.2.9
Removing the stop for canister from suspension rail C.2.10
Removing the up-key connection from suspension rail C.2.11
Removing the RS 232 print from suspension rail C.2.12
Functional descriptions C.3
Electrical diagrams C.4
Technical specifications C.5
Options C.6
Accessories 6.7
Product delivery D
Adjustments D.1
(Dis)-assemblies D.2
Replacing the opto-sensor glasses for cup sensors D.2.1
Removing locking catch for drip guide D.2.2
Removing the cup station D.2.3
Removing the spring contacts for drip tray sensors D.2.4
Changing the configuration of the cup platform positions D.2.5
Functional descriptions D.3
Total overview D.3.1
To Next Page
Loading...
