Service Manual FB 7100 Preface and safety instructions
1 - 4 January, 2005
Example The Brewing system serves as an example and it can be found under:
Service informa-
tion
As the vending machine is subject to changes, consecutively numbered
service messages (named ‘technical information’) will inform you on these
changes. The service messages are to be filed as chapter 8 in this service
manual.
General note The concept of this manual is designed in such a way that it is valid for dif-
ferent types of machines. If a machine is not equipped with a certain com-
ponent, the corresponding section is mentioned, but will be blank. The
complete numbering has not been changed. Some of the subsections, e.g.
the one on *External Options’, can be completed by the service technician
with respect to specific countries if required.
Chapter 5 Functions
Section B Brewing system
Subsection 1 Adjustments
- This subsection describes all possible adjustments
for this section, regarding timing, calibration, etc.
2 (Dis-)assemblies
- This subsection explains in detail how a certain
part, belonging to this section, has to be
assembled, disassembled or replaced.
3 Functional description
- This subsection explains in detail how a certain
system in the machine works and how the different
parts in the system interact.
4 Electrical diagrams
- Here you can find a description of electrical inputs
and outputs of the Brewing system.
5 Technical specifications
- The technical specifications for the Brewing
system, described in this section are given here.
6 Overview of options
- Available options, specially for the Brewing system.
7 Accessories
- Accessories to the Brewing system.
To Next Page
Loading...
