Xerox 4112

Stored Programming
Xerox 4112/4127 Copier/Printer 7-5
User Guide
7. From the Watermark screen:
a. Select On
b. Mark the Date & Time box
c. Select Save
8. Press the Start button to end registration and store the programming. Once you call the
copy job programming, all the screens that you programmed will display prior to job
submission.
Notes
• For additional information about naming and calling stored programming, see: on
page 7-7 and on page 7-9.
• One-touch buttons M01 to M20 are provided for Stored Programs 1 to 20.