Maintenance
11-12 Xerox 4112/4127 Copier/Printer
User Guide
5. Return the unit to its original position.
6. Close the Right Cover of the finisher.
Note
A message will display and the machine will not operate if the right cover is open even slightly.
Emptying the Punch Scrap Container
The Touch Screen displays a message indicating when it is time to empty the Punch Scrap
Container.
The punch counter resets to 0 each time you open the Punch Scrap Container, so empty the
container each time it is opened.
Tip
Remove the Punch Scrap Container while the system is powered ON. If you switch off the power
when emptying the Punch Scrap Container, the machine cannot detect that the scraps have
been removed and reset the punch count.
1. Make sure that the machine has stopped copying and printing, then open the Right Cover
on the finisher.
2. Pull the Punch Scrap Container out.
To Next Page
Loading...
Need help?
General
