Scan
3-4 Xerox 4112/4127 Copier/Printer
User Guide
Scan Presets, More... Button
You can select and save additional scan-presets by selecting More... in the Scan Presets area.
• for High Quality Printing: Suitable for documents containing graphics and photographs.
Using this option will result in a large file size and the maximum image quality.
• Simple Scan: Suitable for documents that require minimal image processing and
compression. Using this option will result in fast processing and an excessively large file size.
If You Have More Documents
If you have more than one stack of documents to scan, select the Next Original button on the
touch screen while the current stack of documents is being scanned. This allows you to scan
several documents as one set of data.
Note
This screen appears only when the documents are being scanned.
1. While documents are scanning, select Next Original.
2. Load the next document.
3. Press the Start button on the control panel.
4. If you have more documents, load the next document and press the Start button.
5. When all documents are scanned, select Last Original.
Notes
• When using the 2 sided document feeder, the machine waits for the next set of documents
after it has finished scanning the first set.
• When the above screen is displayed and no operation is performed after a certain period of
time has elapsed, the machine automatically assumes that there are no more
documents.The Build Job feature must be enabled and switched on.
• Up to 999 pages can be stored.
To Next Page
Loading...
Need help?
General
