Xerox 4112

Copy
2-8 Xerox 4112/4127 Copier/Printer
User Guide
Changing the copy quantity
To change the number of documents that are being scanned or copied, follow these steps:
1. From the Control Panel:
a. Press the Stop button
b. Press Job Status button
2. From the Job Status screen, select the copy job.
3. Select either Details or Job Progress.
4. Select Change Quantity.
5. Using the Control Panel keypad, enter the new copy quantity.
6. Select Save.
7. Select or press Start.
Interrupting the copy job
To temporarily interrupt a copy job in progress in order to perform another copy job, follow
these steps:
1. Press the Interrupt button.
Note
The Interrupt button lights and the Copy tab screen displays. This means the machine is in
the job interrupt mode.
2. Place a document in the document feeder or on the document glass and change the
feature settings as required.
3. Enter the quantity.
Interrupt
button
Keypad