Xerox 4112

Problem Solving
Xerox 4112/4127 Copier/Printer 12-67
User Guide
2. Open and then close the right cover of the finisher completely. The machine will not
operate if the cover is open even slightly.
Paper jams at finisher tray
Tip
Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your copy/print jobs.
1. Remove jammed paper from the finisher tray.
Note
If paper is torn, check inside the machine and remove it.
2. Open and then close the right cover of the finisher completely. The machine will not
operate if the cover is open even slightly.
Paper jams at booklet output tray
Tip
Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your copy/print jobs.
1. Make sure that the machine has stopped printing and then open the right cover on the
finisher.