Problem Solving
12-58 Xerox 4112/4127 Copier/Printer
User Guide
3. Return lever 3e to the original position.
4. Close the Finisher right cover completely. The machine will not operate if the cover is open
even slightly.
Paper jams at lever 3g and knob 3f
Tip
Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your copy/print jobs.
1. Make sure that the machine has stopped printing and then open the right cover on the
finisher.
2. Move lever 3g upward and to the left, turn knob 3f to the left, and remove the jammed
paper.
Note
If paper is torn, check inside the machine and remove it.
To Next Page
Loading...
Need help?
General
