Xerox 4112 - Replacing the Staple Waste Container on the Standard Finisher

Maintenance
Xerox 4112/4127 Copier/Printer 11-9
User Guide
5. Push the removed cartridge back to the original position until it clicks into place.
6. Close the Right Cover on the Standard Finisher.
Note
A message will display and the machine will not operate if the right cover is open even slightly.
Replacing the Staple Waste Container on the Standard Finisher
The machine displays a message indicating that the Staple Waste Container is full. To replace
the container:
1. Make sure that the machine has stopped copying and printing, then open the Right Cover
on the finisher.
2. Locate the Staple Waste Container (R5) in the finisher.
3. Grip the container and move the lever to the right; the Unlock position.