Specifications
Xerox 4112/4127 Copier/Printer 13-7
User Guide
Standard Finisher specifications
Item Specification
Tray Type Output Tray: Collated/Uncollated
Finisher Tray: Collated/Uncollated (Offset available)
Booklet Tray: Collated/Uncollated
Supported Paper Size Top Tray:
Maximum: A3, 12.6 x 19.2î (330 x 488 mm)
Minimum: A6 (postcards)
Finisher Tray:
Maximum: 12.6 × 19.2in. (330 x 488 mm)
Minimum: B5
Supported Paper Weight Top Tray and Finisher Tray: 52 - 253 gsm
Capacity
500 sheets
Important: When using Xerox 20 lb./75 gsm paper.
Tray Capacity Top Tray: 500 sheets
Finisher Tray:3,000 sheets, 200 sets*
* When using A4 , B5 , 8.5 × 11in. , 8 x 10 in. , 7.5 x 10.5 in. ,
16K only. When using paper of other sizes, tray capacity is 1,500
sheets and 100 sets.
Stapling (variable-length)
Maximum stapled sheets: 100 sheets
When using paper of size larger than A4 or 8.5 x 11 in., the maximum
number of sheets that can be stapled is 65.
Staple nails may bend when using certain paper types.
Paper size:
Maximum: A3, 11 x 17 in.
Minimum: B5
Staple position:
1 location: (front: angled stapling, center: parallel stapling, back:
parallel stapling*)
2 locations: (parallel stapling)
*: Angled stapling for A3 and A4
Hole Punching Supported paper size:
Maximum: A3, 11 x 17 in.
Minimum: B5 (2 holes), A4 (4 holes)
Number of holes: 2, 4, 3 (optional)
Paper type: 52 - 200 gsm
Folding See Booklet-Maker Finisher specifications
To Next Page
Loading...
Need help?
General
