Xerox 4112 User Manual

Copy
Xerox 4112/4127 Copier/Printer 2-23
User Guide
Binding Edge Erase
The binding-edge erase feature on the Book Copying screen, erases the shadow from the center
section of a bound document. You can set the width for Binding Edge Erase in the range from 0
to 1.9 in. (0 to 50 mm) in 0.1 in. or 1 mm increments.
Examples:
Binding Edge Erase value: 0 mm
• Your bound original is a spiral-bound book and you want to copy both the right and left
pages of the book.
•You select Left Page Then Right.
•You do not increase the Binding Edge Erase value; therefore, the Binding Edge Erase value
is 0 mm.
• You make a copy of the left and right side pages of your book. The copy output shows the
copies with black marks along the binding edge.
Binding Edge Erase value: 10 mm
• Using the same bound original, you select Left Page Then Right.
• Increase the Binding Edge Erase to 10 mm.
• You make a copy of the left and right side pages of your book. The copy output shows the
copies without black marks along the binding edge, and you have a crisp, white copy of the
pages:
xjdhjcjhkjs
sjhfjhksfh
kshdhfd
kshfkhf’
skhfk
shfjdka
fh8&02034
xjdhjcjhkjs
sjhfjhksfh
kshdhfd
kshfkhf’
skhfk
shfjdka
fh8&02034
xjdhjcjhkjs
sjhfjhksfh
kshdhfd
kshfkhf’
skhfk
shfjdka
fh8&02034
xjdhjcjhkjs
sjhfjhksfh
kshdhfd
kshfkhf’
skhfk
shfjdka
fh8&02034

Xerox 4112 Specifications

General

Brand	Xerox
Model	4112
Category	All in One Printer
Language	English