Xerox 4112

Problem Solving
12-64 Xerox 4112/4127 Copier/Printer
User Guide
Paper jams at tri-fold output tray 2d and lever 2g
Tip
Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your copy/print jobs.
1. Make sure that the machine has stopped printing and then open the right cover on the
finisher.
2. Pull out the tri-fold output tray 2d, swing lever 2g to the right, and remove the jammed
paper.
Note
If paper is torn, check inside the machine and remove it.
3. Return lever 2g to the original position and push back the
tri-fold output tray 2d.
4. Close the Finisher right cover completely. The machine will not operate if the cover is open
even slightly.