Copy
Xerox 4112/4127 Copier/Printer 2-35
User Guide
Booklet Creation - Covers
You can make booklet copies with the covers attached. The front and rear cover can be output
before the first page and after the last page of the document and on a different type of paper.
1. From the Booklet Creation screen, select Covers... The screen is displayed (default No
Covers).
2. Select the applicable cover options.
3. Select the applicable cover tray.
4. Select the applicable main body tray.
5. Set the Front Cover Quantity and Rear Cover Quantity using the up and down buttons.
6. If needed, select the Last Page on Back Cover checkbox.
7. Select Save to keep your changes.
To Next Page
Loading...
Need help?
General
