Problem Solving
Xerox 4112/4127 Copier/Printer 12-57
User Guide
3. Return levers 3b and 3d to the original position.
4. Close the Finisher right cover completely. The machine will not operate if the cover is open
even slightly.
Paper jams at lever 3e and knob 3c
Tip
Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your copy/print jobs.
1. Make sure that the machine has stopped printing and then open the right cover on the
finisher.
2. Move lever 3e, turn knob 3c to the right, and remove the jammed paper.
Note
If paper is torn, check inside the machine and remove it.
To Next Page
Loading...
Need help?
General
