Copy
2-4 Xerox 4112/4127 Copier/Printer
User Guide
Selecting Copy Features
Note
The features displayed on the All Services screen depend on the configuration of the
machine. To use the Login Setup feature or Auditron Administration feature, you need a
UserID and Password, or just a UserID. For information about UserIDs and Passwords, contact
the System Administrator.
1. Press the Services button on the control panel.
2. Select Copy.
Tip
If the System Administrator has configured the machine to display “Explanations”, (using
the All Services - Screen Default settings in Administrator mode), text is displayed in the
panel on the right side of the screen. When this feature is enabled, you must select OK to
continue.
3. Select OK.
4. If previous settings remain, press the Clear All button on the control panel.
5. Select the applicable features from each tab as necessary.
To Next Page
Loading...
Need help?
General
