Xerox 4112 User Manual

Machine Status
Xerox 4112/4127 Copier/Printer 10-11
User Guide
Symbol Set 208 0: Roman 8 (Default) 19: Math 8
1: ISO 8859-1 Latin 1 20: PS Math
2: ISO 8859-2 Latin 2 21: Pi Font
3: ISO 8859-9 Latin 5 22: Legal
4: ISO 8859-10 Latin 6 23: ISO 4 United Kingdom
5: PC-8 24: ISO 6 ASCII
6: PC-8 DN 25: ISO 11 Swedish:names
7: PC-775 26: ISO 15 Italian
8: PC-850 27: ISO 17 Spanish
9: PC-852 28: ISO 21 German
10: PC-1004 (QS/2) 29: ISO 60 Norwegian v1
11: PC Turkish 30: ISO 69 French
12: Windows 3.1 Latin 1 31: Windows 3.0 Latin 1
13: Windows 3.1 Latin 2 32: Windows Baltic
14: Windows 3.1 Latin 5 33: Symbol
15: DeskTop 34: Wingdings
16: PS Text
17: MC Text
18: Microsoft Publishing
Font Size 209 400-5000 (Default: 1200): Specify the point size of a font in increments of 25.
The value of 100 represents 1 point.
Font Pitch 210 600-2400 (Default: 1000): Specify the pitch size of a font. The value of 100
represents a pitch size of 1.
Form Line 211 5-128 (Default: 64 or 60, depending on region): Specify the number of lines on a
page.
No. of Sets 212 1-999 (Default: 1): Specify the number of print sets.
Image
Enhance
213 0: Off
1: On (Default)
Enable or disable enhanced image mode.
Hex Dump 214 0: Off (Default)
1: On
Enable or disable a hex dump.
Draft Mode 215 0: Off (Default)
1: On
Enable or disable draft mode.
Binding 217 0: LEF (Default)
1: SEF
Specify which edge of the paper is to be bound.
Line
Termination
218 0: Off (Default)
1: Add-LF (Appends an LF to CR)
2: Add-CR (Appends a CR to LF and FF)
3: CR-XX (Appends a CR to LF and FF, and LF to CR)
Parameter Item Value

Xerox 4112 Specifications

General

Brand	Xerox
Model	4112
Category	All in One Printer
Language	English