Product overview
1-18 Xerox 4112/4127 Copier/Printer
User Guide
Qualified users can implement the MeterAssistant feature based on the following criteria:
• “If your machine has an Integrated Controller ONLY, then all you need to do is sign up for
MeterAssistant.
• “If you have a third-party controller, such as EFI Fiery, you MUST have:
• Two drops/ports for two separate internet connections
• Two IP addresses (one for the machine and one for the controller); Meter Assistant
uses the machine's IP address to obtain billing meter information.
Note
Existing customers of the Xerox 4112/4127 Family can perform the eligibility test as listed
below to see if their equipment is eligible. Customer who recently purchased the Xerox 4112/
4127 can bypass this process.
Use the Machine Eligibility Test at http://www.xerox.com/account-management/meter-
reading-test/enus.html to determine if you can take advantage of SMart eSolutions
capabilities.
Notes
• This feature may currently be available only in the U.S.A.
• Ensure that you have an internet connection to your machine.
Make sure that you have an account on www.xerox.com
. Add all devices in inventory that you
wish to register for Automatic Meter Readings to your account. For more information on setting
up and activating your equipment for meter reads, go to www.xerox.com/meterreads
.
To Next Page
Loading...
Need help?
General
