Xerox 8830 - Problem Solving - Printer Issues; Printer Operation Problems; Problem Solving - Scanner Issues; Locating Observed Scanner Symptoms

REP 8.4 Cut Sheet Media Feed
Clutch
Parts List on PL 8.1
WARNING
Switch off the Main Power Switch. Disconnect the
Power Cord.
Removal
1. Latch the Xerographic Module at the Service
Position (REP 9.2).
2. Remove the Media Transport Assembly (REP
8.1).
3. (Figure 1): Remove the Cut Sheet Media Feed
Clutch.
1
Disconnect the
connector from the
clutch
Remove the screw and
the bracket:
R3025K
Pull the clutch off
the shaft
Remove the
E-ring
Figure 1. Removing the Cut Sheet Media Feed Clutch
REP 8.4
1/98
4-22
8830